Digital Clock
 
   • DCD-8
        - VSG-4
        - CX-4
   • DCD-12
 
   • Product Chart
 
  Time Code
 
   • SR-112
        - TCG
        - SP/SR112
   • SR-28
 
   • Product Chart
 
  Others
 
   • Legacy Products
 
  SR-112 Time Code Distripalyzer  
 
 
   
     
 
Userís manual (File size = 3443 kb)
Data sheet (file size = 177 Kb)
 
     
     
   
     
 

Current software revision is version 4.01.

 
     
     
   
     
 
• Making a direct Ethernet connection from a computer without a router (pdf).
• Switchless power up modification (pdf).
 
     
   
   
     
 
• Where does the word Distripalyzer come from?
• What are some of the new features of the SR-112 compared with the older SR-15?
• Is the SR-112 distributor the same as an audio DA?
• Can the SR-112 generate time code?
• When updating firmware on my SR-112, which file should I use: 'Complete' or 'Software'?
 
     
     
 
Where does the word Distripalyzer come from?
 
The original SR-15 had 3 main functions: It was a DISTributor, a STRIPper and an anALYZER. The SR-112 no longer strips pilot tone as this feature is no longer in demand. But it is still a DISTRIButor and an anALYZER. It also has several new features (see next FAQ).
 
What are some of the new features of the SR-112 compared with the older SR-15?
 
- 12 outputs instead of 5.
- Accepts HD Video Sync as well as SD Video Sync.
- Large reader display.
- Ethernet.
- Dual redundant power supplies.
- Optional Time Code Generator.
- Card slot for future I/O's
 
Is the SR-112 distributor the same as an audio DA?
 
No. An audio DA is designed to distributes an audio signal. The SR-112 on the other hand not only distributes time code, but also reshapes it, eliminating distortions and amplitude fluctuations. Also, an audio DA may no be designed to handle a 2.4KHz square wave and may induce distortions.
 
Can the SR-112 generate time code?
 
Yes. With the optional TCG software upgrade, the SR-112 can generate new time code, locked to video or not. It also includes a repair mode that enables you to Jam-sync or regenerate time code, repairing errors such as drop outs, jitter or video phase alignment.
 
When updating firmware on my SR-112, which file should I use: 'Complete' or 'Software'?
 
Whenever possible, you should use the 'software' only because, in case a crash occurs during the 'programming' phase, you can always revert to the 'Loader' mode (see 13.3 in the User Manual). However, when making a major software rev number change, the 'complete' update is required. For example, an update between any 2.xx versions can be 'software' only. But an update from 1.xx to 2.xx must be a "complete" update.
 
     
     
   
   
     
  The following pics are available for download. If you need another format or resolution, please contact us.  
     
       
  SR-112 - front panel
JPG - 22.00” x 3.80” at 72 dpi
File size = 88 Kb
 
       
       
  SR-112 - rear panel
JPG - 17.00 ” x 1.75” at 72 dpi
File size = 38 Kb
 
       
   
PRODUCT INFORMATION
 
   • Overview
   • Description
   • Specifications
 
ONLINE SUPPORT
 
   • Manual & Data sheet
   • Software revision
   • Application Notes
   • FAQ's
   • Pics
 
REGISTRATION
 
Click here to register your products online
 
Already registered...
Click here